Custom Intrax Shocks, Made for Your Iveco
Iveco builds vans, trucks and rugged expedition vehicles that carry heavy loads over long distances and rough terrain. Intrax makes Iveco dampers to order, with the damping, length and mounting chosen for your vehicle. Developed and assembled by Intrax Suspension Technology, each set is aimed at expedition builds, work use, campers or the road. For wear, setup and price, see the answers below.
Frequently asked questions about Iveco shock absorbers
What do Iveco shock absorbers do?
Iveco, founded in Turin, builds vans, trucks and rugged all-terrain vehicles. A van converted to a camper or an expedition truck can weigh far more than the original specification, so the dampers need to be matched to the finished vehicle. You can read the details in our knowledge base article on how dampers work.
Why should Iveco shock absorbers match the springs?
A properly matched pair keeps the vehicle stable in crosswinds and when you pass a truck, which makes long drives less tiring.
How can I recognise worn Iveco shocks?
Watch for these signs of worn Iveco shocks:
- Bouncing on rough roads
- Sway in corners with a load
- Dive under braking
- Uneven tire wear
- Oil on the damper
Heavy use accelerates wear.
What does a Iveco feel like when the dampers are worn?
The cab or cabin moves more than before and the ride becomes rougher, even on a good road.
Is it safe to drive on worn Iveco shocks?
The consequences are bigger in a heavy vehicle. Braking distances grow and the load moves more, so damper condition is a safety matter.
How can I test Iveco dampers myself?
Check for oil, play in the mounts and a loss of resistance when you press the corner. Test all four corners, as the front and rear often wear at different rates.
Do the test on level ground with the tires at the correct pressure for an honest result.
How long do Iveco shocks last?
Long distances with heavy loads put a lot of work into the dampers. Inspect them at least once a year.
Can a leaking Iveco shock absorber be repaired?
A damp film is not always a failure, but a clear leak means the damper is losing its force. Send us a clear photo and we will tell you what is possible.
How much do Iveco shocks cost?
We quote per set after we know your vehicle, your use and your wishes. request a quote, it costs nothing.
Which models do you make Iveco shocks for?
Check the dropdown first. If your Iveco is not there, tell us what you have and we will see whether we can build for it.
Can Iveco shocks be made for off-road and expedition use?
Yes. For off-road and expedition use we can supply dampers that keep the vehicle stable and comfortable under load.
Tell us how and where you drive and we will suggest a suitable specification.
Why choose Iveco shocks made to measure?
A fully equipped expedition vehicle behaves very differently empty and loaded. We look at your actual weight, the springs fitted and the roads you drive, and build the dampers to suit.
Which Intrax system suits my Iveco?
That depends on how you use your Iveco and how much you want to adjust. Our guide explains how to find the right Intrax shocks for your vehicle, from the 1K2 to the Macpherson XL.
Contact
Is your Iveco not in the list, or do you want advice for a heavy conversion? We build Iveco dampers to order. Contact us and we will advise you.
See our products, or already know what you are looking for? Please do not hesitate to request a quote.
Our Iveco products
- Display 60 Products per page










