Camber plates

View all camber plates

Intrax offers a full range of fully adjustable camber plates, as well as hard top mounts.

Compared to standard rubber top mounts, that allow a lot of movement, our top mounts offer a significantly increased control over the suspension and steering. The camber plates make the camber (in some cases also the caster) freely adjustable. Here you can see which camber plates and hard top mounts we currently have in stock. If the camber plate and/or hard top mount you are looking for is not listed, then contact us as we often can provide another solution for you (welding plates or custom-made plates).

IMPORTANT NOTE: We do not recommend using camber plates and/or hard top mounts for street use. The hard connection made between the suspension and the chassis may cause extra noise.

The camber plates are manufactured using the best materials. The bearing is enclosed in a stainless-steel bearing retainer. The 15mm thick aluminum top plate is made of anodized 7075 ‘aircraft quality’ aluminum. The precision bearing has a diameter of 16 or 20mm, which can be adjusted in height to 21mm and 25mm respectively. The camber plate adds 18mm height from the beginning of the top pin to the body. We use a top-quality bearing, suitable for rally cross, auto cross, car racing, rally, ovals and street use. Shock absorbers of other brands, such as Koni, Bilstein, Reiger, AST, Proflex or KW often fit in our bearing through an adapter bush (12 > 16mm or 14 > 16mm). The camber plates for the EVO’s and Impreza’s are available in a special, extra strong version, especially designed for ‘heavy duty’ use at professional rally level. These plates have a bearing with an inside diameter of 20mm (instead of the usual 16mm).

Request quote