Intermeccanica
Custom Intrax Shocks, Built for Your Intermeccanica
Intermeccanica combined Italian bodywork with American V8 power in cars that are rare and valuable today, and they deserve dampers that suit them. Our Intermeccanica dampers are not taken from a shelf: each set is valved and built after we know your vehicle and how you drive it. Developed and assembled by Intrax Suspension Technology, each set is aimed at touring, historic events, concours and the road. Wear, setup and price are explained in the questions below.
Find the shocks for your Intermeccanica
Choose your Intermeccanica model
Or see all shock absorbers.
Frequently asked questions about Intermeccanica shock absorbers
What do Intermeccanica shock absorbers do?
Intermeccanica was founded in Turin by Frank Reisner and became known for pairing Italian bodies with American V8 engines. The result was a light, fast car with a lot of torque and classic suspension. Our knowledge base article on how dampers work explains the principle.
Why should Intermeccanica shock absorbers match the springs?
Old springs sag and soften over the years, and modern tires grip harder than the originals. The damper has to be matched to the springs as they are now, not as they were in the factory.
How can I recognise worn Intermeccanica shocks?
Watch for these signs of worn Intermeccanica shocks:
- Bouncing after bumps
- Nose dive when braking
- A loose, vague feel in corners
- Uneven tire wear
- Oil on the damper
Old dampers on a classic are often overdue.
What does a Intermeccanica feel like when the dampers are worn?
Soft, imprecise and a little unnerving at higher speeds, particularly on wet roads.
Is it safe to drive on worn Intermeccanica shocks?
It is not ideal. Worn dampers lengthen the braking distance and make the car wallow in corners, which matters on older cars with simple brakes.
How can I test Intermeccanica dampers myself?
Check for oil, play in the mounts and a loss of resistance when you press the corner. Test all four corners, as the front and rear often wear at different rates.
How long do Intermeccanica shocks last?
Original dampers on a classic are often decades old. If you do not know when they were last replaced, assume they are tired.
Can a leaking Intermeccanica shock absorber be repaired?
It depends on the damper. Quality dampers with a serviceable design can be rebuilt, while cheap sealed units usually cannot. Send us the details of your Intermeccanica dampers.
How much do Intermeccanica shocks cost?
The cost depends on how advanced the dampers are. Fixed ones are the most affordable, while adjustable and race-spec sets cost more. Tell us your wishes and request a quote.
Which models do you make Intermeccanica shocks for?
Choose your model in the dropdown to see the exact versions. If you do not see your Intermeccanica, send us the details and we will check what we can do.
Can Intermeccanica shocks be made for touring and historic events?
Yes, and many owners do. Tell us how you use the car for touring and historic events and we will advise on the right damping.
Why choose Intermeccanica shocks made to measure?
These cars are rare, so every detail counts. We build the dampers to fit your specific car, matched to the springs and tires you run.
Which Intrax system suits my Intermeccanica?
That depends on how you use your Intermeccanica and how much you want to adjust. Our guide explains how to find the right Intrax shocks for your vehicle, from the 1K2 to the Macpherson XL.
Contact
Is your Intermeccanica not in the list, or do you want advice on a setup? We build Intermeccanica dampers to order. Contact us and we will advise you.
See our products, or already know what you are looking for? Please do not hesitate to request a quote.
Our Intermeccanica products
- Display 60 Products per page














