Boes
Custom Intrax Shocks, Built for Your Boes
Boes is a small, specialist name, and a specialist car needs a proper damper setup rather than a catalogue number. Our Boes dampers are not taken from a shelf: each set is valved and built after we know your vehicle and how you drive it. The dampers come from Intrax Suspension Technology, where each set is designed and assembled for track days, club racing and hill climbs. Below you will find answers about wear, setup and price.
Frequently asked questions about Boes shock absorbers
What do Boes shock absorbers do?
Boes is a small, specialist name, which means few spares are available and little information is shared online. Dampers for a vehicle like that are best made around its actual weight and mounting points. For the technical background, see our knowledge base article on how dampers work.
Why should Boes shock absorbers match the springs?
Springs store energy and dampers release it in a controlled way. Without that control a stiff car becomes nervous, so both are specified together.
How can I recognise worn Boes shocks?
Watch for these signs of worn Boes shocks:
- Bouncing over kerbs
- A rear end that unsettles on exit
- Vague feedback
- Uneven tire wear
- Oil on the damper
A light car shows wear clearly.
What does a Boes feel like when the dampers are worn?
You may feel the car pushing wide on entry, then snapping at the rear on exit, because the weight transfer is no longer controlled.
Is it safe to drive on worn Boes shocks?
A worn damper can fail suddenly under load, so do not wait for a problem on track before you have it checked.
How can I test Boes dampers myself?
Push down on one corner and release it. A good damper lets the body rise once and settle. If your Boes bounces more than once, the damper is tired. Compare all four corners.
How long do Boes shocks last?
Heat is the main enemy. The oil and seals age faster on a hot circuit, so look at the condition after every few events.
Can a leaking Boes shock absorber be repaired?
It depends on the damper. Quality dampers with a serviceable design can be rebuilt, while cheap sealed units usually cannot. Send us the details of your Boes dampers.
Clean the damper body first, as dirt and oil together can look worse than the leak really is.
How much do Boes shocks cost?
The price depends on the version and options. Send us your details and request a quote, and we will come back with a price and delivery time.
Which models do you make Boes shocks for?
The list covers the Boes versions we have built for. Other versions and special builds are possible on request.
Can Boes shocks be made for club racing?
Yes. Dampers for club racing are built to be serviced, so they can be revalved when your setup or your rules change.
Why choose Boes shocks made to measure?
Instead of guessing, we start from your measurements and your use. The result is a set built for your vehicle and tuned to the events you drive.
Which Intrax system suits my Boes?
That depends on how you use your Boes and how much you want to adjust. Our guide explains how to find the right Intrax shocks for your vehicle, from the 1K2 to the Macpherson XL.
Contact
Is your Boes not in the dropdown, or do you want help with a race setup? We build Boes dampers to order. Contact us and we will advise you.
See our products, or already know what you are looking for? Please do not hesitate to request a quote.
Our Boes products
- Display 60 Products per page
















