Aquila shock absorbers

Aquila


Custom Intrax Shocks, Engineered for Your Aquila

Aquila builds lightweight, race-bred cars where handling is everything and there is nowhere for poor damping to hide. You get Aquila dampers built for your weight, your springs and your plans, whether that is the road, a circuit or rough ground. Intrax Suspension Technology designs and assembles every set, which suit track days, club racing and hill climbs. The questions below cover wear, setup and price.

Find the shocks for your Aquila

Choose your Aquila model

Or see all shock absorbers.

Frequently asked questions about Aquila shock absorbers

What do Aquila shock absorbers do?

Aquila cars are built with a lightweight, track-oriented approach, where a low mass and a stiff chassis make the dampers one of the biggest levers on lap time. Our knowledge base article on how dampers work explains the principle.

Why should Aquila shock absorbers match the springs?

Too little rebound leaves the wheel bouncing, too much holds it down on the next bump. The right balance depends on your springs, and that is what we tune.

How can I recognise worn Aquila shocks?

Watch for these signs of worn Aquila shocks:

  • Bouncing over kerbs
  • A rear end that unsettles on exit
  • Vague feedback
  • Uneven tire wear
  • Oil on the damper

A light car shows wear clearly.

What does a Aquila feel like when the dampers are worn?

The car loses its calm. It skips over kerbs, the steering feels light and the tires wear unevenly.

Is it safe to drive on worn Aquila shocks?

Not safely. At track speeds, a car that keeps bouncing after a kerb or a bump is hard to control, so have the dampers checked before you drive.

Rain, gravel and uneven surfaces make worn damping more noticeable and more risky.

How can I test Aquila dampers myself?

Drive the car on a road you know well and note how it behaves over bumps and in corners. Combine that with a visual check for oil on the damper bodies.

How long do Aquila shocks last?

Check for leaks and play after every event, and plan a service or rebuild before the damping starts to fade.

Can a leaking Aquila shock absorber be repaired?

Oil on the outside shows that the damping force is dropping. We can inspect the damper and tell you whether a rebuild is worth the cost.

How much do Aquila shocks cost?

Every set is made to order, so the price depends on the model, the adjustability and the use. Tell us about your Aquila and request a quote.

Which models do you make Aquila shocks for?

You can find the Aquila models in the dropdown at the top of this page. A model that is not listed may still be possible, because everything is made to order.

Can Aquila shocks be made for track days and club racing?

Yes. Dampers for track days and club racing are built to be serviced, so they can be revalved when your setup or your rules change.

Why choose Aquila shocks made to measure?

With a car that is often tuned by its owner, a made-to-order damper lets you choose the specification that matches your build, and adjust it later as your setup develops.

Which Intrax system suits my Aquila?

That depends on how you use your Aquila and how much you want to adjust. Our guide explains how to find the right Intrax shocks for your vehicle, from the 1K2 to the Macpherson XL.

Contact

Is your Aquila not in the list, or do you want help with a track setup? We build Aquila dampers to order. Contact us and we will advise you.

See our products, or already know what you are looking for? Please do not hesitate to request a quote.

Our Aquila products

Also check our other products