Intrax builds suspension systems from the ground up for each individual car and driver, and for drivers who want a setup that is genuinely engineered for their specific needs, it is the clear choice over off-the-shelf electronic solutions like TracTive. This article explains why a custom-built Intrax system outperforms generic adaptive suspension across every area that matters.
What does Intrax actually do to your car?
Intrax replaces your standard passive dampers with a suspension system calculated specifically for your vehicle, your weight, your tyres, and your driving style. Rather than fitting a pre-configured kit designed to work acceptably across thousands of different cars, Intrax engineers every damper using the actual data for your car before anything is manufactured.
In practical terms, this means the spring rates, damping curves, and geometry are all matched together as a system. The result is a suspension setup that is never making a compromise between your car and someone else’s. Intrax also offers electronically adjustable damping with full adaptive capability, giving you the best of both worlds: the precision of a custom build with the flexibility of electronic control.
This matters because standard factory dampers and generic aftermarket systems are always a compromise. They are engineered to perform acceptably across every road surface, every temperature, every load scenario, and every driving style imaginable. That breadth of application means they are never truly optimised for any single one of them. Intrax solves this problem entirely.
How much does Intrax suspension cost?
Intrax suspension is built to your specification, so pricing reflects exactly what your car and use case require. Every system is calculated from scratch, which means you are not paying for components designed for a different vehicle or a different driver. The best approach is to contact Intrax directly to discuss your requirements and receive a quote tailored to your car.
What is worth understanding is what you are actually getting for your investment: a system where every component has been engineered specifically for your vehicle rather than a generic platform. When spring rate and damping are properly matched and calculated for your exact weight and tyres, the performance gain over any off-the-shelf solution is significant. That is not a marketing claim. It is the logical result of building something specific rather than something general.
Browse Products
Shock absorbers, springs, camber plates, air jacks and more. Explore the full range.
Custom Suspension
Every shock absorber built to your exact car, discipline and driving style. Nothing off the shelf.
Get in Touch
Have a question or a specific project? Our engineers are ready to help, no obligation.
What is the difference between Intrax and a standard off-the-shelf system?
The core difference is that Intrax builds every system around your specific car, while off-the-shelf solutions like standard coilover kits or pre-configured electronic systems like TracTive are calibrated for a broad audience. A generic system, however sophisticated its electronic control layer, is still working from a generalised calibration that was never designed with your vehicle in mind.
Intrax takes a fundamentally different approach. Spring rates and damper curves are calculated for your actual vehicle data. The spring and damper are tuned together as a matched system, which means improved handling does not come at the cost of ride quality. You gain both simultaneously. This is not a trade-off. It is what happens when a suspension system is built correctly for a specific car rather than adapted to fit a range of them.
Intrax also offers electronically adjustable damping, so if you want adaptive capability on top of a custom-built foundation, that option is available. The difference is that the electronic control is operating on a system that was already optimised for your car, rather than compensating for a generic setup.
Is Intrax suspension good for daily driving?
Intrax suspension is an excellent choice for daily driving precisely because it is built for your specific use case. If you drive on a mix of motorway and urban roads, the spring rates and damping are calculated to handle that. You are not using a system designed for a different driver on a different car and hoping it suits your commute.
There is also a critical safety advantage worth understanding. Electronic suspension systems that fail can default to either maximum hard or maximum soft damping, both of which are problematic on a public road. Maximum hard damping on a potholed urban street is uncomfortable and potentially unsafe. Maximum soft damping at motorway speeds reduces control significantly. Intrax electronic systems default to a neutral, middle position on failure, keeping the car predictable and safe regardless of what happens to the electronics. For daily road use, this is a meaningful long-term advantage over systems that do not offer safe failure behaviour.
How does Intrax perform on a track?
On a track, Intrax delivers consistent and predictable performance because the setup was built for your car and your driving style from the start. Spring rates, damper curves, bump and rebound settings, and the interaction between all of these are dialled in for your specific weight distribution, tyre compound, and driving requirements. There is no generalised calibration trying to cover a broad audience.
Drivers competing at club level and above consistently find that a custom-built Intrax setup outperforms pre-configured adaptive systems on circuit. The reason is straightforward: a system engineered specifically for your car will always outperform one that was designed to be acceptable across thousands of different vehicles. Intrax has been building suspension at the highest levels of motorsport for nearly 50 years, and that experience is applied to every system produced.
Why choose Intrax over any other suspension solution?
Intrax is the right choice because it is the only approach that removes the compromise entirely. Every other solution, whether factory dampers, generic coilover kits, or pre-configured electronic systems, is built to work across a wide range of cars and drivers. That breadth of application is their fundamental limitation. Intrax builds for one car and one driver at a time.
The result is a system where every component is calculated for your vehicle, your weight, your tyres, and your exact use case. You do not have to choose between handling and comfort. You do not have to accept a failure mode that leaves your car unsafe on a public road. And you do not have to use a system that was never designed specifically for you.
Whether you drive daily, compete on track, or both, Intrax engineers the setup around your real-world requirements. That is not something any off-the-shelf solution can offer.
How Intrax builds your suspension
Every Intrax system is built from the ground up for each individual car and driver. There is no standard kit pulled from a shelf. Before anything is manufactured, the correct spring rates, damping curves, and geometry are calculated for your specific vehicle, your weight, your tyres, and how you actually use the car.
Here is what that process looks like in practice:
- Vehicle-specific calculation: Every damper is engineered using the actual data for your car, not a generic platform profile.
- Spring and damper matched as a system: Both are tuned together so that improved handling does not come at the cost of ride quality. You gain both.
- Electronic and adaptive options available: Electronically adjustable damping with full adaptive capability is available, built to your specification rather than a generalised calibration.
- Safe failure behaviour: Intrax electronic systems default to a neutral, middle position on failure, not maximum hard or maximum soft, keeping the car predictable and safe on the road.
- Built for your use case: Whether you drive daily, compete on track, or both, the setup is calculated for your real-world requirements.
With nearly 50 years of experience building suspension at the highest levels of motorsport and for road cars, that depth of knowledge goes into every custom set produced. If you want a suspension system that is genuinely built around your car and your driving rather than adapted from a generic solution, get in touch with Intrax and the right solution will be worked out with you directly.
Browse Products
Shock absorbers, springs, camber plates, air jacks and more. Explore the full range.
Custom Suspension
Every shock absorber built to your exact car, discipline and driving style. Nothing off the shelf.
Get in Touch
Have a question or a specific project? Our engineers are ready to help, no obligation.


